TRENDnet TEW-410APBplus, 54Mpbs 802.11g Wireless Access Point + Bridge manual Click OK, English

5.Under the IP Address tab, select Specify an IP address and enter “192.168.1.50” for the IP address and “255.255.255.0” for the Subnet Mask. Then, click OK.

6.Click OK.

7.At this point, the installation may require files from your Windows CD-ROM. If this happens insert Windows CD-ROM into your CD-ROM drive and select the CD-ROM drive to load the necessary files.

8.After the files load, the System Settings Change prompt will appear; click Yes to restart your computer.

NOTE: If this prompt does not appear, you must manually restart your computer.

9. Your computer is now ready to access and configure the Access Point. Point.

4 English