TRENDnet Dual-Band 802.11 a+g Wireless Reuter Install Hardware, Verify Hardware Installation

2.Install Hardware

1.Connect one RJ-45 network cable from the Cable/DSL Modem's Ethernet port to the WAN port on the AP/Router.

2.Connect a different RJ-45 network cable from one of the AP/Router's LAN ports to your computer's network port.

3.Turn on your Cable/DSL modem.

4.Connect the included Power Adapter to your AP/Router and to your power outlet; your AP/Router should turn on.

5.Turn on your computer

POWER

14

2

Verify Hardware Installation

Verify that the following front panel lights are on: Power, Internet, and one LAN port LED for each wired computer connected to the AP/Router.

LAN

POWER

INTERNET

NOTE: Due to European Wireless Regulations, Super A Mode is not supported in the EU version.

3English