![](/images/new-backgrounds/1108889/10888913x1.webp)
6.Click OK.
7.Click Close on the Local Area Connection Properties box.
8.Click Start; click on Run. Then type cmd and click OK.
9.The Command Prompt window will appear. Type ipconfig at the C:\ prompt and press the Enter key.
10.If your IP Configuration reads as follows, your computer is successfully connected to the router:
IP Address: 192.168.1.x (x= any number from 2~255)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
NOTE: If your IP Configuration does not match the values above, please restart your computer and retry the steps in this section.