TRENDnet TK-802R, TK-1602R manual Daisy-Chain

Daisy-Chain

Note:

1.Must use the daisy chain cable provided with the KVM switch

2.Only daisy chain the KVM switch with another TK-802R or TK-1602R.

3.Stackable up to 16 KVM switches

6.Connect one end of the daisy- chain to the Daisy chain in port on the first (master) KVM switch.

7.Connect the opposite end of the daisy-chain cable to the Console port on the second (slave) switch.

8.If you have a third KVM switch, connect one end of the daisy chain to the Daisy chain in port on the second KVM switch. Then connect the opposite end of the daisy-chain cable to the Console port on the third (slave) switch. Repeat for each additional switch.

9.Press Port 1 button on the first (master) switch for 3 seconds to initialize the daisy chain.

3

English