TRENDnet TK-1602R, TK-802R manual Hot-Key Commands

Hot-Key Commands

A keyboard hot-key command consists of at least three keystrokes:

Hot-Key command = ScrLk + ScrLk + Command key(s)

After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again. You then have another 2 seconds to press a command key. A beep confirms that the KVM switch is in "Hot-Key" mode. If you do not press a key within 2 seconds, the switch will exit hot-key mode.

To select a specific PC port:

Select PC = ScrLk + ScrLk + A + B	+ Y + Z
Bank number	Port number

For example, to select port 1, hit the following key sequence:

Select PC = ScrLk + ScrLk + 0 + 1 + 0 + 1

For example, to select port 10 of the 10th KVM switch on a series of daisy chained TK-1602R's you hit the following key sequence:

Select PC = ScrLk + ScrLk + 1 + 0 + 1 + 0

Note: When using the KVM switch standalone, type in 0 + 1 for the bank number.

For a list of all the Hot-Key commands, please see the Quick Reference Sheet.

6

English