TRENDnet trendnet The Megapixel PoE Dome Internet Camera with IR manual Network Advanced, ∙ QoS

TRENDnet User’s Guide

Network >> Advanced

∙HTTPS

Enable: Select this option to enable HTTPS, which is a secure protocol to provide authenticated and encrypted communication within your network.

HTTPS Port: Assign a HTTPS port in the text box. The default HTTPS port is 443.

∙Bonjour: The devices with Bonjour will automatically broadcast their own services and listen for services being offered for the use of others. If your browser with Bonjour, you can find the camera on your local network without knowing its IP address.

The Apple Safari is already with Bonjour. You can download the complete Bonjour for Internet Explorer browser from Apple's web site by visiting http://www.apple.com/bonjour/.

TV-IP262PI

∙RTSP

RTSP Streaming: The camera supports three levels of RTSP access. The default RTSP Port is 554.

Disable	RTSP link does not require authentication. No
	username/password required.
sic	RTSP link prompts for authentication.
	Username/password are transmitted in plain text.
Digest	RTSP link prompts for authentication.
	Username/password are encrypted during data
	transmission.

TRENDnet recommends using RSTP Digest authentication method. Disable and Basic methods pose security risks. Please verify if your RTSP client supports RSTP authentication method selected.

Multicast settings: Configure the following settings so that you can deliver information from your camera to a set of receivers.

Group IP	Assign a category of IP addresses to receive the information
	from the camera.
H.264 Port	Assign a multicast port for H.264 in the text box.
	The default port is 1234.
MPEG4 Port	Assign a multicast port for MPEG4 in the text box.
	The default port is 1236.
Audio Port	Assign a multicast port for audio in the text box.
	The default port is 1238.
TTL	Set the TTL value from 1 to 255, which is used to modify
	the time to live field in the IP header.

∙QoS

Live Video DSCP: Assign the DSCP (DiffServ Code Point) of the stream video

from the camera.

Live Audio DSCP: Assign the DSCP (DiffServ Code Point) of the stream audio from the camera.

© Copyright 2012 TRENDnet. All Rights Reserved.

18