TRENDnet User’s Guide
Port Settings | HTTP port: 80 (default) |
| RTSP port: 554 (default) |
Digital Zoom | 3x |
Dynamic DNS | Yes |
Time | Synchronize with NTP server or set time/date manually |
Supports up to 2 destination accounts | |
System Log | 100 entries (max.) |
TV-IP262PI
Troubleshooting
1.The Power LED and Ethernet Activity LED do not light up.
The power supply or camera might be faulty. Check that the connection to both the power source and the terminal on the back of the camera are secure and that you are using the provided power supply. If the camera is otherwise functioning correctly, the LEDs might have been disabled in the configuration. See the System section under the Basic menu.
2.The camera can’t be accessed or access is slow
There might be a problem with the network cable. To confirm that the cables are working, ping the address of a known device on the network. If the cabling is OK and your network is reachable, you should receive a reply similar to the following (…bytes = 32 time = 2 ms).
Another possible problem may be that the network device such as a hub or switch utilized by the Network Camera is not functioning properly. Please confirm the power for the devices are well connected and functioning properly.
3.The camera can be accessed locally but not remotely
This might be caused by a firewall. Check the Internet firewall with your system administrator. The firewall may need to have some settings changed in order for the Network Camera to be accessible outside your local LAN. For more information, please refer to the section about setting up/accessing your camera behind a router.
© Copyright 2012 TRENDnet. All Rights Reserved.
36
