TRENDnet trendnet The Megapixel PoE Dome Internet Camera with IR Http Notify For Motion Trigger

TRENDnet User’s Guide

HTTP Notify For Motion Trigger

Send the query parameter via an HTTP notification when an event is triggered. Host: Enter the IP of the HTTP server

Port: Enter the Port number of the HTTP server

User Name: Enter the username of the HTTP server

Password: Enter the password of the HTTP server

Query: Enter the query parameter for the request if necessary

Example:

Host: 192.168.10.1

Port: 80

Query: xxx.cgi?name1=value1&name2=value2

Example: cgi/event.cgi?status=#s&time=#t&model=modelname Result: http://192.168.10.1:80/cgi/event.cgi?status=#s&time=#t&model=modelname

TV-IP262PI

Event Server Setting >> FTP

∙FTP

Host Address: Enter the IP address of the target FTP server.

Port Number: Enter the port number used for the FTP server.

User Name: Enter the user name to login into the FTP server.

Password: Enter the password to login into the FTP server.

Directory Path: Enter the destination folder for uploading the images. For example, /TV-IP262P.

Passive Mode: Select the Enable option to enable passive mode.

FTP Upload With: Set the format of the image that is to be uploaded to the FTP server. You can set the format as One Snapshot or images containing Pre-event(0 ~ 3) seconds and Post-event(0 ~ 3) seconds.

NOTE: The Pre-Event or Post-Event only works when video resolution set up to 720P or lower. It will not work with SXGA resolution.

© Copyright 2012 TRENDnet. All Rights Reserved.

23