TRENDnet User’s Guide |
Network >> IP Filter
The IP Filter setting allows the administrator of the camera to limit the users within a certain range of IP addresses to access the camera.
To disable this feature, select the Disable option; otherwise, select the Accept option to assign the range of IP addresses that are allowed to access the camera, or select the Deny option to assign the range of IP addresses that are blocked to access the camera.
Disable: Select this option to disable the IP Filter function of the camera.
Accept
IPv4: Assign a range of IP addresses that are allowed to access the camera by entering the Start IP address and End IP address options. When you are finished, click Add to save the range setting. You can repeat the action to assign multiple ranges for the camera.
For example, when you enter 192.168.0.50 in Start IP Address and 192.168.0.80 in End IP Address, the user whose IP address located within 192.168.0.50 ~ 192.168.0.80 will be allowed to access the camera.
IPv6: Enter the IP Address that is allowed to access the camera.
Deny
IPv4: Assign a range of IP addresses that are blocked to access the camera by entering the Start IP address and End IP address options. When you are
finished, click Add to save the range setting. You can repeat the action to assign multiple ranges for the camera.
For example, when you enter 192.168.0.50 in Start IP Address and 192.168.0.80 in End IP Address, the user whose IP address located within 192.168.0.50 ~ 192.168.0.80 will not be allowed to access the camera.
IPv6: Enter the IP Address that is not allowed to access the camera.
Video & Audio
The Video & Audio menu contains four
© Copyright 2012 TRENDnet. All Rights Reserved.
19
