TRENDnet TV-IP302PI manual Application Diagram, Camera Connectors

TRENDnet User’s Guide TV-IP302PI

Application Diagram

Camera Connectors

Speaker	GPIO	Ethernet /PoE	Microphone	BNC	Power
Out	Port	Port	In	Video Out	Connector

∙Power Connector: Connects the power adapter to supply power to the camera if using non-PoE connection

∙BNC Video Out: Connect a CRT monitor or handheld monitor.

∙Microphone In: Connects an external microphone to receive the on-the-spot sound where the camera is installed.

∙Ethernet/PoE Port: Plugs the network cable to connect to your local area network (LAN). If you are using the PoE, you must have the network cable connect to your PoE switch or PoE Injector.

∙GPIO Port: Connect external device. Please refer to I/O setting paragraph. It's also used for IP camera reset. Please refer to Factory Default paragraph.

∙Speaker Out: Connects an external audio device (such as the active speaker) to deliver sound via the camera.

© Copyright 2014 TRENDnet. All Rights Reserved.

3