TRENDnet User’s Guide
3.Plug in and connect the power adapter to the camera. If you are using the PoE to supply power to the camera, please skip to the next step. Click Next when you are done.
4.Connect a network cable to the camera’s network port and then to your router.
If you are using PoE, please ensure the cable is connected to a PoE switch or PoE injector.
TV-IP302PI
5.Wait while camera is searching.
6.The founded cameras will show on the screen. The camera already selected by default if you have only one camera installed. If you have more than one camera in the same Network, you will need to identify the camera by the MAC ID. Click Next.
© Copyright 2014 TRENDnet. All Rights Reserved.
6
