TRENDnet User’s Guide
Call out the Control Panel → Network and Internet → Network and Sharing Center → Click "See full map".
Network >> Advanced >> HTTPS
When the users access cameras via Https protocol, the transmitted information will be encrypted so that the security level is arisen.
You can select the connection type.
∙Http: user can access the camera via Http path.
∙Https: user can access the camera via Https path but cannot via Http path.
∙Http & Https: Both the Http and Https path can be used to access the camera. When you change the setting of connection type, it may cause connection error or disconnection error if you switch the protocol directly. Therefore, Http & Https mode is necessary. If you want to change from Http to Https, please switch to “Http & Https” mode first, and then switch to “Https” mode. Same method when you change from Https to Http.
The Https protocol has certificate verifying mechanism. When the user access a website via Https, the browser will check the certificate of that domain and verify its trustiness and secure.
Certificate generation process:
1.Remove the existing certificate: Before you generate a new certificate, please remove installed one. Select "Http" connection type and click "Remove". If a dialog box pops up to ask you to confirm, click “Yes”.
TV-IP302PI
2.Created Request: Fill in the following form and click “apply”.
3.After you generate a certificate request, if you choose to turn it to the trusted
© Copyright 2014 TRENDnet. All Rights Reserved.
17
