TRENDnet TVIP672WI, KXTG7872S manual Wireless Setup

TRENDnet User’s Guide TV-IP672W / TV-IP672WI

Under Port Settings, select the HTTP Port (80 is the default) and also select the RTSP Port (554). Under UPnP, click the UPnP checkbox if you want to enable this function. Click the UPnP Port Forwarding checkbox if you want to enable to set the ports. Select the External HTTP port and select the RTSP port. If you are using a MAC check the Bonjour checkbox to enable this function. Click Apply to set the changes.

Wireless Setup

This screen shows the Wireless Settings. Click the Wireless checkbox to enable wireless. Complete the details in the fields according to your router. Enter a Network Name, under Site Survey select the SSID from the drop-down list or rescan your network settings. Select the Wireless Mode from the drop-down list (Infrastructure, Ad-Hocmode). Select your Security Mode from the drop-down list. Select from WEP/WPA- PSK/WPA2-PSK. Finally enter the security key. Click Apply to accept the changes.

WEP – Wired Equivalent Privacy is a security protocol for wireless local area networks defined in the 802.11b standard. WEP provides the same level of security as that of a wired LAN.

WPA-PSK - is a more secured method of wireless encryption. With WPA-PSK you don’t provide your router with an encryption key but rather a paraphrase.

WPA2-PSK – highly secured method of wireless encryption.

© Copyright 2013 TRENDnet. All Rights Reserved.

18