TRENDnet TVIP672WI, KXTG7872S manual Product Hardware Features, Rear Panel View, Front Panel View

TRENDnet User’s Guide

Product Hardware Features

Rear Panel View

Antenna

WPS button

LAN port

Reset button

Power port Micro SD slot

Line Out

•LAN Port – Connect Ethernet cables to your wired network devices.

•Power Port – Connect the included power adapter from your camera to an available power outlet.

Note: Use only the adapter that came with your camera.

•Reset Button – Use an item such as a paperclip to push and hold this button for 3 seconds and release to reset your camera to its factory defaults.

•WPS (Wi-Fi Protected Setup) – Push and hold this button for 3 seconds to activate WPS. The button LED is blinking green when WPS is activated.

•Line Out – Connect speaker to enable audio out

•Micro SD Lot – Insert a Micro-SD card to store camera video files.

•Antenna – 2dBi detachable antenna

TV-IP672W / TV-IP672WI

Front Panel View

Light Sensor

IR LED

Camera Lens

Focus Ring

		Power/Link LED
Privacy button
	Microphone

•IR LED – Built-in 6 IR LED for night vision uses. (for TV-IP672WI)

•Light Sensor – Detects the light source to turn IR on or off.

•Focus Ring – Turn to adjust the focus of the camera.

•Microphone – Built-in microphone for audio can be turn on or off.

•Privacy button – Turns the camera on/off when necessary.

•Power - This LED indicator is solid blue when your camera is powered on. Otherwise if this LED indicator is off, there is no power to your camera.

•Link – This LED indicator is blinking orange when there is connection/data to your camera.

© Copyright 2013 TRENDnet. All Rights Reserved.

2