TRENDnet TVP-224HR PC Configuration

Chapter 4
PC Configuration 4
This Chapter details the PC Configuration required on the local ("Internal") LAN.
Overview
For each PC, the following may need to be configured:
• TCP/IP network settings
• Internet Access configuration
Windows Clients
This section describes how to configure Windows clients for Internet access via the TVP-
224HR.
The first step is to check the PC's TCP/IP settings.
The TVP-224HR uses the TCP/IP network protocol for all functions, so it is essential that the
TCP/IP protocol be installed and configured on each PC.
TCP/IP Settings - Overview
If using the default TVP-224HR settings, and the default Windows TCP/IP
settings, no changes need to be made.
• By default, the TVP-224HR will act as a DHCP Server, automatically providing a
suitable IP Address (and related information) to each PC when the PC boots.
• For all non-Server versions of Windows, the default TCP/IP setting is to act as a
DHCP client.
If using a Fixed (specified) IP address, the following changes are
required:
• The Gateway must be set to the IP address of the TVP-224HR
• The DNS should be set to the address provided by your ISP.
Do to NAT resolution issues, it is not recommended to
use the TVP-224HR under another Router.
26