TRENDnet TVP-224HR 10.2 Making a call with TVP-224HR FXS Port

TVP-224HR User’s Guide
82

Hint
You may also check the LED indicators on the TVP-224HR. When it rings,
the related LED should flash. After you pick up the handset, it should
remain on and off when the phone is on hook.
Now let’s test your TVP-224HR that is equipped with 2 FXO interfaces.
Assume you have one extension line with your PBX system, say, 201 as the
extension number, we connect this line to the gateway’s port 0 (FXO port),
then connect a telephone phone set to port 3 (for example) of the gateway.
Pick up your extension handset, for
example, 316 and dial ‘201’. After one
ring, you should hear a dial tone. Now
dial ‘203’. The telephone connected to
the TVP’s FXS port should ring.

Hint
If you do not hear the dial tone, please check the line impedance of
your PBX. For a TVP-224HR with FXO port, please contact your
PBX Supplier or System Integrator for further information
316
201
204
1. Now let’s make a call to your PBX extension. Pick up the handset
connected to the FXS port and dial ‘201’, you should hear a dial tone
(This means that TVP-224HR picks up the line connected to your PBX).
Then dial ‘316’, your extension handset should ring right away.

Hint
This guide only uses the default values. Once you are familiar with
the dial plan set up, you may design your own dial plan.
10.2 Making a call with TVP-224HR FXS Port
TVP-224HR has two FXS ports. An FXS port can connect to an analogue phone
directly, and a FXO port can connect to a PBX system or CO line.
Connection: Analogue telephone set connects
to FXS port