Tribest SD-P9000GP operation manual Operating Instructions

OPERATING INSTRUCTIONS

For your safety and to protect your Tribest Sedona Combo, please follow the instructions below:

1.Always keep the Tribest Sedona Combo on a level surface.

•Keep the Tribest Sedona Combo at least 10 cm away from walls, other appliances or furniture.

2.Open the door to insert trays into the Tribest Sedona Combo. Hold the tray in the horizontal position and push the tray into the proper slots.

•Place the food evenly and neatly on each tray as close as possible (remember dehydrating removes water and/or shrinks food). For best results, cut the food into even slices.

•It is recommended to use separate trays for each type of food.

•You may dehydrate up to 9 trays simultaneously.

•For 4-5 trays of dehydrated recipes, use the upper compartment for best results.

The white plastic dividers on the side of the Sedona Combo now help as a simple visual device to separate upper and lower compartments.

•Double check whether all the trays are properly loaded.

3.Plug into an outlet that has 10 amp capacity.

4.Turn the main switch ON.

5.There are three settings to choose with the Sedona Combo:

• TWO-STAGE SEQUENTIAL TEMPERATURE-TIMER (TST) Use Only

The Two-Stage Sequential Temperature-Timer (TST), a 2-phase mode that allows for both FAST mode and RAW mode to be applied sequentially. This is the default setting of the when it is turned on.

1)Turn the Sedona Combo on, both the RED and GREEN lights to the right of the MODE button will be lit. (Red=FAST mode, Green=RAW mode.)

2)Press the F°/C° button to choose farenheit or celcius.

3)Press the SET button to set FAST mode to your desired temperature using the UP/DOWN 10 or 1 buttons.

4)Press SET again to set the desired time using the UP/DOWN 10 or 1 buttons for FAST mode.

5)Press SET again to set the desired temperature using the UP/DOWN 10 or 1 buttons for RAW mode.

6)Press SET again to set the desired time using the UP/DOWN 10 or 1 buttons for RAW mode.

7)Press SET to finalize settings.

8)Press the TRAY button to choose the upper, lower, or both drying compartments.

9)Press the START/PAUSE button to begin operation.

NOTE: During FAST mode the upper red light blinks - while the higher temperature operates first for the desired set time. RAW mode, the lower green light blinks- automatically lowers the temperature to the second setting for the remaining dehydrating time.

14