Tricity Bendix CSIE 510 installation instructions Setting the Controls for Automatic USE

SETTING THE CONTROLS FOR AUTOMATIC USE

This is very easy. All you have to do is work through the steps below. The clock will work out the rest for itself.

1	Is the electricity supply on?
2	Is the clock	To adjust turn the selector knob
	showing the	to ‘Manual’ then to ‘Time
	correct time?	Setting’. Turn the setting knob in
		either direction.
3	How long	Turn the selector knob to ‘Cook
	will the food	Time’. Then turn the setting knob
	take to cook?	until the length of time you want
		the food to cook shows in the
		display.	The maximum cooking
		time is 10 hours. ‘Auto’ will
		show in the display.
4	What time do	Turn the selector knob to ‘End
	you want the	Time’.	Turn	the setting	knob
	food to be	until the time the oven is to
	cooked by?	switch off shows in the display.
		The cookpot (		) will go out.
		The ‘End Time’ must not be
		more than 23 hours 59 minutes
		from the time of day.			For
		example if the time of day is 9.00
		am the latest ‘End Time’ will be
		8.59 am the next day.
5	Set to	Turn the selector knob to
	automatic.	‘Automatic’.
6	Turn on the	Turn the oven control to the
	oven control.	required setting.

The time shown on the right gives an example of setting the automatic controls when the time is

9.00am, the food is to be cooked for 2½ hours and the food is needed at 6.00 pm (1800 hours).

The clock will work out what time the oven will switch itself on and it will turn the oven off at the end. Once the automatic sequence is finished there will be an alarm to remind you that you need to set the oven for manual operation. To do this turn the selector knob to ‘Manual’. Turn off the oven control.

If you change your mind and want to cancel a programme that you have set simply turn to ‘Time Setting’ and then to ‘Manual’.

13