INTRODUCTION

WARNING: THIS APPLIANCE MUST BE EARTHED

RATING PLATE

Record the model, product and serial numbers on the back cover of this instruction book from the rating plate. This is situated on the lower front frame of the appliance and can be seen upon opening the top oven door.

The appliance must be protected by a suitably rated fuse or circuit breaker. The rating of the appliance is given on the rating plate.

Do not remove the rating plate from the appliance as this may invalidate the guarantee.

INSTALLATION

If your appliance has been damaged in transit, contact your supplier immediately. DO NOT attempt to install it.

Your appliance left the factory fully packaged to protect it from damage. If it is delivered without packaging and damage has occurred, the manufacturer cannot accept responsibility. Contact you supplier for advice.

Once the packaging has been removed the appliance should only be moved by hand. DO NOT use a sack barrow or any other aid to lift the appliance as damage may occur.

Connection to the electricity supply must be carried out by a qualified electrician/competent person.

The electrical connection should be made using a double pole isolating switch (cooker socket) with at least 3mm contact separation in all poles. The cable must have conductors of sufficiently high cross- sectional area to prevent overheating and deterioration.

Six square millimetres (6.00mm2) is the recommended cross-section area.

The cable should be routed away from potentially hot areas marked by an ‘X’ in the diagram below.

To move the appliance, open the main oven door, and lift the appliance by holding inside the top of the oven compartment.

This is a type X appliance, which means it is free- standing and can be fitted with cabinets on one or both sides.

Side walls which are above hob level should be protected by heat resistant non-combustible material and MUST NOT be nearer than 40mm to the hob side.

A nominal air gap of 2mm at the sides of the appliance is required to enable the appliance to be moved into position. It is recommended that proprietary trims are fitted to protect the worktops of either side of the appliance. These are available from most DIY stores.

Always ensure an air gap is maintained at hotplate level. Tiles or other forms of deep wall covering should not obscure this gap.

Air gap

Overhanging surfaces or a appliance hood should be a minimum of 685mm above the hob.

It is important to ensure that the appliance is level after installation. Levelling feet are fitted to the appliance to accommodate uneven floors.

8

Page 7 Page 9
Page 8
Image 8
Tricity Bendix DSIE328 installation instructions Introduction, Rating Plate, Installation
Page 7 Page 9

DSIE328 specifications

The Tricity Bendix DSIE328 is an advanced dishwasher that combines efficiency, innovation, and reliability to meet modern household needs. Designed with user convenience and performance in mind, this appliance offers a comprehensive range of features that cater to various dishwashing requirements.

One of the standout characteristics of the DSIE328 is its energy efficiency. With a high energy rating, it ensures that users can enjoy a thorough clean while minimizing electricity consumption. This model is designed to conserve water as well, making it an environmentally friendly choice for households aiming to reduce their ecological footprint.

The DSIE328 boasts a spacious interior that accommodates up to 13 place settings, making it perfect for families or individuals who frequently entertain guests. Its adjustable top basket provides versatility, allowing users to accommodate larger pots and pans with ease. The dishwasher's varied rack configurations ensure that all types of dishware, including delicate glassware and heavily soiled items, can be loaded efficiently.

Equipped with advanced cleaning technologies, the DSIE328 employs multiple wash programs tailored to different cleaning needs. The intensive wash cycle is ideal for removing stubborn grime, while the eco wash option effectively cleans dishes with minimal water and energy. Additionally, the quick wash feature delivers convenient solutions for those needing clean dishes in a hurry, providing a fast yet reliable cleaning cycle.

Noise reduction is another key characteristic of the Tricity Bendix DSIE328. Operating at a low decibel level, this dishwasher ensures a quiet evening at home, allowing users to run their appliances without disturbing family activities. Furthermore, the reliable build quality and sleek design make it an attractive addition to any kitchen.

Safety features are also a priority in the design of the DSIE328. The appliance is fitted with a child lock to prevent accidental operation and includes a leak protection system that mitigates the risk of water damage.

In summary, the Tricity Bendix DSIE328 is a versatile and efficient dishwasher that excels in its ability to clean a variety of dishes while prioritizing energy and water conservation. Its comprehensive features and thoughtful design ensure convenience and reliability for users, making it a valuable appliance for any household.
Top Page Image Contents