OVEN CLEAN FEATURE
USES OF OVEN CLEAN FEATURE
During normal use the Stayclean coating within the oven will become splashed with fats and food residues. When the oven clean feature is selected the Stayclean surfaces burn off any soilage. See Care of Stayclean Surfaces on page 41 for instructions. Regular use of the oven clean function will keep the Stayclean panels in good condition.
SELECTING OVEN CLEAN
Remove oven shelves and bakeware from oven.
Turn the multifunction selector to oven clean.
Turn the main oven temperature control to 220°C.
THINGS TO NOTE
1.The oven indicator neon will glow until the oven has reached the desired temperature and then go out. It will then cycle ON and OFF showing that the oven temperature is being maintained.
2.The internal oven light will operate when the selector is set.
3.The cooling fan for the controls will operate after a short time when oven clean is selected. See page 15 for more details on the operation of the cooling fan.
HINTS AND TIPS
Manual cleaning of the Stayclean surfaces is NOT recommended.
Damage will occur if soap impregnated steel wool pads, aerosol cleaners or any abrasive cleaners are used.
Slight discolouration and polishing of the Stayclean surfaces may occur in time, but this will not affect their self cleaning properties.
Use the oven clean function for an hour or two per week to avoid a build up of soilage which could prevent the stay clean enamel from working properly.
A good time to use the oven clean function is after the weekly roast. Simply select oven clean function as described above and allow the oven to run for an hour or so.
Surfaces which are not Stayclean coated e.g. the oven base, the oven exterior etc., will require manual cleaning. Refer to the Care and Cleaning
lSection on page 40 for details.
Useful hints and tips are given on page 40 on how to keep soilage to a minimum.
33
