INSTALLATION INSTRUCTIONS
FITTING INTO THE SPACE
BETWEEN CABINETS
IMPORTANT: Ensure that the oven is switched off at the wall before any further work is carried out.
Ensure the cooker is in front of the cabinet. See Fig. 13.
Take out all oven furniture before installation to reduce the weight you need to lift.
To place the cooker into the space between cabinetry follow the procedure below:
N.B. Two people will be required to carry out the lifting procedure.
Each person should squat either side of the cooker.
Tilt the cooker so that your hands can support the underside of the cooker.
Raise the appliance to the correct height. Rest the rear underside of the cooker on the mounting brackets while your hands support the front.
The cooker can be pushed fully into the space. Take care to avoid fouling the mains lead.
Ensure the cooker is central and level.
When the cooker is fully housed, screw the stability screws (supplied with the cooker) into the underside of the worksurface in the positions indicated (see Fig. 14), taking care not to distort the trim. It is advisable to turn each screw alternately to avoid damaging the trim.
Place the top trim flush with the edge of the worksurface, with the cork spacers upover (see Fig.15) and screw into position using the screws supplied with the cooker.
Replace the plinth board.
Switch on the cooker and refer the user to the operating instructions.
Fig.13
Fig.14
Fig.15
55
