Tripp Lite 1000 VA Specifications, Model, SMART750RM1U, SMART1000RM1U, Series, AGSM1000Y1U31

200210187 Smart 700-1000 RM1U Owner’s Manual 93-2102.qxd 11/1/2002 9:50 AM Page 11

Specifications

Model:	SMART750RM1U	SMART1000RM1U
Series:	AGSM1000Y1U31	AGSM1000Y1U31
Output Capacity (VA/Watts):	750/450	1000/700
Battery Runtime in Minutes
(Half Load/Full Load):	18/7	13/5
Battery Recharge Time:	2-4 hrs.	2-4 hrs.
Approvals:	UL, cUL, NOM	UL, cUL, NOM

All Models: Input Voltage (120V); Input Frequency (60 Hz); On-Battery Output Voltage Range (115V ± 8%); Output Waveform Line Mode (filtered sinewave); Output Waveform Battery Mode (sine wave); AC Surge Suppression (meets IEEE 587 Cat. A & B standards); AC Noise Attenuation (>40 dB); AC Protection Modes (H to N, H to G, N to G).

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

11