Tripp Lite 1000 VA owner manual Other UPS Features Rear Panel, AC Receptacles

200210187 Smart 700-1000 RM1U Owner’s Manual 93-2102.qxd 11/1/2002 9:50 AM Page 8

Basic Operation continued

Other UPS Features (Rear Panel)

AC Receptacles

Your UPS features 15-amp AC outlets. These output receptacles provide your connected equipment with AC line power during normal operation and battery power during blackouts and brownouts. The UPS protects equipment connected to these receptacles against damaging surges and line noise. If you have a network connection to your UPS, you can remotely reboot connected equipment by turning the receptacles OFF and ON using Tripp Lite UPS software. Select models also feature a specially labeled “Load Control” receptacle that can be turned ON and OFF independently of the other receptacles using Tripp Lite UPS software. See software instructions for details.

Smart DB9 Serial Port

Your UPS features a DB9 port that may be used to connect the UPS to a DB9 port on any workstation or server. It uses RS-232 protocol to communicate UPS status and power conditions. Use with Tripp Lite cabling and PowerAlert Software to remotely monitor and manage power and automatically save open files and shut down equipment during a blackout. See Connection section.

Smart USB Port

Your UPS has a USB port that may be used to connect the UPS to a USB port on any workstation or server. It uses USB protocol to communicate UPS status and power conditions. Use with Tripp Lite cabling and PowerAlert Software to remotely monitor and manage power and automatically save open files and shut down equipment during a blackout. See Connection section.

EPO (Emergency Power Off) Port

Your UPS features a EPO port that may be used to connect the UPS to a switch to enable emergency inverter shutdown. See Connection.

SNMP Accessory Slot

Remove the small cover panel from this slot to install optional accessories to remotely monitor and control your UPS. Refer to your accessory’s manual for installation instructions. Contact Tripp Lite Customer Support at (773) 869-1234 for more information, including a list of available SNMP, network management and connectivity products.

Ground Lug

Use this to connect any equipment that requires a chassis ground.

8