200210187 Smart 700-1000 RM1U Owner’s Manual 93-2102.qxd 11/1/2002 9:50 AM Page 4

Connection

1Plug your UPS into an

electrical outlet.

Your UPS requires connection to a 15-amp dedicated circuit. Once your UPS is plugged in, the UPS will enter STANDBY mode. The fan will activate and the

” (POWER) LED will begin flashing. The outlets will not be active until the UPS is turned ON.

1

2Plug your equipment into

your UPS.

Your UPS is designed to support only computer equipment. You will overload your UPS if you connect household appliances, laser printers or surge suppressors to the UPS’s Outlets.

3Turn your UPS ON

Press the “ ” (POWER) button

Hold the button for a moment, until you hear a beep. The “ ” (POWER) LED will stop flashing and be on constantly

Release the button

Your UPS is now ON and its AC outlets are active.

2

3

4

Page 4
Image 4
Tripp Lite 1000 VA Plug your UPS into an Electrical outlet, Plug your equipment into Your UPS, Turn your UPS on