Peak output | INVERTER MODE - Double Boost rated to 7200 watts peak (up to 10 seconds). Overpower rating supports longer |
capacity (watts) | term overloads to 5400 watts for up to 15 seconds prior to inverter shutoff. |
|
|
INPUT |
|
Input connection | DC INPUT: Set of DC |
type |
|
|
|
Input cord length | DC INPUT: User supplies cabling. 8 gauge or larger (see manual). AC INPUT: user supplies hardwire input cabling |
|
|
Recommended | DC INPUT: Requires 36VDC input source capable of delivering 114A for the required duration (when used at full |
Electrical Service | continuous capacity - DC requirements increase during |
| applications, professional hardwire |
|
|
Maximum input | DC INPUT: Full continuous load - 114A at 36VDC. AC INPUT: 26 amps at 230VAC with full inverter and charger load |
amps / watts | (10.4A max |
| |
|
|
BATTERY |
|
Expandable battery runtime
DC system voltage
Battery recharge rate
Runtime is expandable with any number of user supplied wet or gel type batteries
36V
30 amp
VOLTAGE REGULATION
Voltage regulation description
Overvoltage correction
Brownout correction
Includes automatic voltage regulation to correct brownouts and
Brownouts are automatically boosted by 10%
LEDS ALARMS & SWITCHES
Front panel LEDs
Switches
PHYSICAL
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, "auto/remote" setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads.
Shipping weight (lbs)
Shipping weight (kg)
Shipping Dimensions (HWD/in)
63
28.6
13.5 x 15 x 21.5
Shipping Dimensions (HWD/cm)
34.3 x 38.1 x 54.6
Unit weight (lbs)
Unit weight (kg)
Unit Dimensions (HWD/in)
Unit Dimensions (HWD/cm)
Material of construction
Form factors supported
58
26.3
7.25x 8.5 x 14
18.4x 21.6 x 35.6
Polycarbonate
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
Cooling method