Recommended Electrical Service
Maximum input amps / watts
BATTERY
DC INPUT: Requires 12VDC input source capable of delivering 72A for the required duration (when used at full continuous capacity - DC requirements increase during
DC INPUT: Full continuous load - 72A at 12VDC. AC INPUT: 6.2A at 230VAC with full inverter and charger load (2.2A max
Expandable battery runtime
DC system voltage
Battery recharge rate
Runtime is expandable with any number of user supplied wet or gel type batteries.
12V
Selectable 5/20 amp
LEDS ALARMS & SWITCHES
Front panel LEDs
Switches
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode.
SURGE / NOISE SUPPRESSION
AC surge | 840 joules AC surge suppression included. |
suppression |
|
|
|
PHYSICAL |
|
Shipping weight (lbs) | 20 |
|
|
Shipping weight (kg) | 9.1 |
|
|
Shipping | 12.5 x 11 x 10.75 |
Dimensions (HWD/in) |
|
|
|
Shipping | 31.8 x 27.9 x 27.3 |
Dimensions |
|
(HWD/cm) |
|
|
|
Unit weight (lbs) | 18.6 |
|
|
Unit weight (kg) | 8.3 |
|
|
Unit Dimensions | 7 x 8.75 x 9 |
(HWD/in) |
|
|
|
Unit Dimensions | 17.8 x 22.2 x 22.8 |
(HWD/cm) |
|
|
|
Material of | Polycarbonate |
construction |
|
|
|
Form factors | Mounting slots enable permanent placement of APSX750 on any horizontal surface (see manual for additional mounting |
supported | information) |
|
|
Cooling method | |
|
|
Style | |
|
|
ENVIRONMENTAL |
|
Relative Humidity | |
|
|
LINE / BATTERY TRANSFER | |
Transfer time from | Transfer time from line power to battery mode: 10 milliseconds (typical - compatible with many computers, servers and |
line power to battery | networking equipment - verify transfer time compatibility of loads for UPS applications) |
mode |
|
|
|
Low voltage transfer | Low voltage transfer to battery power: In AC "auto" mode, inverter/charger switches to battery mode as line voltage |
to battery power | drops to 144V (user adjustable to 163, 182, 201V - see manual) |
|
|
High voltage transfer | In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 272 |
to battery power |
|
|
|
SPECIAL FEATURES |
|
Appearance | Black color |
|
|
