Tripp Lite B004-004 Series Appendix, Troubleshooting, Problem, Cause, Solution, Scan Mode

Appendix

Troubleshooting

If you are experiencing problems, first make sure that there are no cable problems. Check all cable connections.

Problem	Cause	Solution
Keyboard Not	Keyboard needs to	Unplug the keyboard
Responding*	be reset	from the Switch, then
		plug it back in.
	Switch needs to be	Turn off the PCs. Wait 5
	reset	seconds; then turn the
		PCs on.
	Switch is in Auto	Press the [spacebar] to
	Scan Mode	exit Auto Scan Mode.
	Switched between	Shut down the PC and
	PCs during boot-up	reboot without switching
	procedure	between PCs.

6