Troubleshooting
Symptom | Possible Cause | Action |
Erratic Behavior | Unit not receiving power under self- | Use the power adapter that was |
| powered operation | provided with the units to provide |
|
| external power. |
|
|
|
Pressing the Hot Keys does not | The connection from the selected | Check the Online LED for the |
get a response | port to the target PC has been | selected port. If it is not lit: |
| broken, or the PC is turned OFF. | 1. Manually press one of the |
|
| |
|
| Select switches to connect to |
|
| a PC that is powered ON. |
|
| 2. Check the cables to make |
|
| sure all are properly connected. |
|
| 3. If the desired PC is OFF, |
|
| power it ON |
|
|
|
| Improper KVM switch reset | Turn OFF KVM Switch and wait 5 |
|
| seconds before turning it back ON. |
|
| This unit cannot be cascaded. |
|
| Note: If the unit is operating in the |
|
| Selfpowered mode (without the |
|
| optional Power Adapter), you must |
|
| unplug the power cord of any con- |
|
| nected PC that has the Keyboard |
|
| 'Power On' function, otherwise the |
|
| switch still draws power from the |
|
| PC. |
| Incorrect keying in the Port ID. | After invoking the hotkey function, |
|
| be sure to key in the Port ID and |
|
| press [Enter] within 1 second for |
|
| each key. |
|
|
|
9
