Tripp Lite B007-008 owner manual Controls and Connections, Front View, Rear View

200603163 93-2538 B007-008 manual.qxd 4/19/2006 1:45 PM Page 4

Controls and Connections

Front View:

1

2 3 4

1Status LEDs:

On Line:	Lights ORANGE when the attached PC is ON. A flashing LED indicates
	that that port is being used as a cascade port and has another KVM Switch
	connected to it.
Selected:	Lights GREEN to indicate which port is currently selected. The LED will
	be flashing when the port is being accessed under the Auto Scan Mode.

2Port Selection

Switches Press a switch to access the PC attached to the corresponding port.

•Pressing Port 1 and Port 2 simultaneously for 3 seconds performs a Keyboard/Mouse Reset

•Pressing Port 7 and Port 8 simultaneously starts the Auto Scan Mode

3Reset Switch

The recessed reset switch can be pressed using a thin object such as a paper clip or ballpoint pen. A warm reset is initiated when this switch is pressed and released. A cold reset is initiated when this switch is kept pressed for longer than 3 seconds.

4Power LED

Lights to indicate that the unit is receiving power.

Rear View:

1 2 3

1Power Jack

The optional power adapter plugs in here. The switch is designed to be non-powered (no external power required). It draws the necessary power from the connected CPUs through the Keyboard/ Mouse connection. External power is required when units are cascaded, or if the CPUs do not providing sufficient power (operation will be erratic).

2Console Port Section

•If this is a single KVM or a first station, your monitor, keyboard and mouse plug in here.

•If this is a second or third level station (cascaded unit), the cables that connect to the upper level KVM connect here.

3CPU Port Section

The cables from the PCs plug in here.

4