Tripp Lite B064-016-04-IP Accessing the B064-Series KVM Switch, Browser, AP Windows Client

3.Network Setup - IP Address Determination (continued)

3.3Browser

1.On a computer/server that is on the same network as your B064-Series KVM Switch, set the computer/server’s IP address to 192.168.0.XXX, where XXX represents any number or numbers except 60. (192.168.0.60 is the default address of the B064-Series KVM Switch)

2.Access the B064-Series KVM Switch using the URL 192.168.0.60

3.Assign a fixed IP address for B064-Series KVM Switch using the same instructions as described in the Local Console section of this chapter.

4.After you log out, reset your computer’s IP address to its original value.

3.4AP Windows Client

For computers running Windows, the B064-Series KVM Switch’s IP address can be determined using the AP Windows Client that comes on the B064-Series KVM Switch CD. When you run the program it searches the network segment for B064-Series KVM Switch devices, and displays the results in a dialog box similar to the one below:

You can use the network address found here to access the B064-Series KVM Switch. Once you login to the KVM switch, you can change the IP Address using the instructions in the Local Server and Browser sections of this chapter.

4.Accessing the B064-Series KVM Switch

4.1Local Console Login

The local console login dialog box is displayed once the installation is complete. When the local console is attached, and there is no user logged in, the login screen will appear on the display. Simply key in your Username and Password and click Login to bring up the OSD Main Page.

Note: If you supply an invalid login, the authentication routine will return an Invalid Username or Password message. If you see this message, log in again being careful to enter the correct Username and Password.

6