4.Accessing the B064-Series KVM Switch (continued)
4.2Browser Login
The
To access the switch via browser, do the following:
1.Open the browser and specify the IP address of the
Note: For security purposes, a login string may have been set by the administrator. If so, you must include a forward slash and the login string along with the IP address when you log in. (For example, a computer with a login string of
2.When you try to log in to the device from your browser, a Security Alert message appears to inform you that the device’s certificate is not trusted, and asks if you want to proceed. The certificate can be trusted; accept the certificate and proceed to the login screen. (See the Owner’s Manual on the
3.Provide a valid Username and Password (set by the KVM switch’s administrator), and click Login to bring up the OSD Main Page.
Note: If you supply an invalid login, the authentication routine will return an Invalid Username or Password message. If you see this message, log in again being careful to enter the correct Username and Password.
4.3 AP Windows Client Login
The AP Windows Client can be found in the Download Section of the OSD or on the CD that came with your
Each time the WinClient.exe file is run, it searches the User’s LAN segment for
If you are connecting to a KVM switch from a remote location, and the
Once connected, click Switch to Remote View to access the KVM switch.
4.4 AP Java Client Login
After downloading the AP Java Client, go to the location on your hard disk where you downloaded the program and
1.Key in the IP address for the unit you want to connect to, as given to you by your system administrator. For security purposes, a login string may have been set up by the administrator. If a login string has been set up, a forward slash followed by the login string must be specified as part of the IP address. (For example, a computer with a login string of
2.Click OK. A Login dialog box appears.
3.Provide a valid Username and Password, as given to you by your system administrator, and click OK to switch to the OSD Main Page.
7