Tripp Lite B072-008-1, B072-016-1 System Requirements, Software, Upgrading the KVM Firmware

Models: B072-008-1 B072-016-1

1 24

Page 16

•Pentium 166 or higher with 16MB RAM and 10MB free Hard Drive space

•Free Serial port

•Windows 98 and later

To update the firmware the KVM system must be connected and switched on

With the NetCommander KVM Update software program you can upgrade the firmware for the:

•Manager

•Server Interface Units

KVM Update enables you to add new features and take advantage of product improvements in a quick and efficient manner.

You can install the KVM Switch Update on any computer, even one not part of the KVM system.

To run the software, connect the RS232 Serial cable to the computer containing the software, and to the KVM Switch.

To install the KVM Switch Update software:

1.Download KVM update software from www.tripplite.com

2.Run the software.

Image 16

Contents

16-Port Table of Contents System Components FeaturesCompatibility Front Panel ConfigurationRear Panel Installation Pre-Installation GuidelinesConnecting the NetCommander KVM System NetCommander Server Interface Unit SIUNetCommander PS/2 Server Interface Unit Connecting the Power Supply Resetting the KVM SwitchRackmounting the NetCommander KVM Rackmount ConsiderationsCascading NetCommander KVM Switches OperationBasic Operation Keyboard HotkeysOSD Settings F2 On-Screen DisplayNavigating the OSD Selecting a ComputerGeneral Settings General Settings windowF7 Defaults Ports Settings Ports Settings windowTime Settings UsersSecurity OSD Help Window F1Scanning Computers F4 Tuning F5Moving the Label F6 Connecting the RS232 Serial Cable Installing the SoftwareSystem Requirements SoftwareStarting and Configuring the KVM Update KVM Switch Update windowVerifying the Version Numbers Obtaining New Firmware Updating the FirmwareReset Open boxTroubleshooting USB/SUN Combo KeysSpecifications FCC Radio/TV Interference NoticeYear Limited Warranty Warranty RegistrationPage 200512060