4.. Local Console
To set the IPv4 address via the local console OSD:
1.From the local console, press the left [Shift] key twice to open the OSD.
2.Press the [F2] key to open the Settings menu.
3.In the Settings menu, press the [Tab] key until the DHCP field is highlighted. Press the [Spacebar] key to toggle the DHCP field from Enabled to Disabled.
4.Pressing the [Tab] key to navigate to the additional fields, type in the desired IP Address, Subnet Mask, Gateway, and DNS Server Address (Optional).
5.Once the IP address is satisfactory, press the [Esc] key to save your changes. This will require that the KVM be rebooted to save the new settings.
To set the IPv6 address via the local console OSD:
1.From the local console, press the left [Shift] key twice to open the OSD.
2.Press the [F2] key to open the Settings menu, and then press the [F2] key again to open the IPv6 Settings menu.
3.In the IPv6 Settings menu, with the Mode field at the top of the screen highlighted, press the [Spacebar] key to toggle between DHCP, Stateless, and Static. DHCP is selected by default, and automatically assigns an IP address via the IPv6 DHCP server.
Stateless is an option for networks with a compliant router that automatically assigns an IP address based on the MAC address of the unit. Static allows you to manually assign an IP address.
4.Pressing the [Tab] key to navigate to the additional fields, type in the desired IP Address, Gateway, and DNS Server Address (Optional).
5.Once the IP address is satisfactory, press the [Esc] key twice to exit and save your changes. This will require that the KVM be rebooted to save the new settings.
47
