1.Disassemble VESA Plate
Use a screwdriver to loosen the bottom screws in order to separate the VESA plate from the wall mount.
2a. Mount on Wood Stud Wall
1 | 2 |
Find and mark the exact location of mounting holes
Anchor Bolt | 3 |
|
Drill pilot holes
Tighten the screw spacing
Screw the wall mount onto the wall
WARNING
•Make sure that mounting screws are anchored into the center of the studs.
Use of a stud finder is highly recommended.
•Installers are responsible to provide hardware for other types of mounting situations.
•Installers must verify that the supporting surface will safely support the combined load of the equipment and all attached hardware and components.
4
10/31/2013 9:59:04 AM |
