Tripp Lite DWT1323S Install the Wall Plate, For clarity, outer cover is not shown, Anchor Bolt

Models: DWT1323S

1 8

Page 6

Align top hole of wall plate to screw in wall and lower the wall plate until the screw is seated in upper area of tear-drop mounting hole.

Anchor Bolt

Install the other screw and level the wall plate, then tighten all screws securely.

13-09-229-93-32A5-EN.indd 6

Image 6

Contents

Tilt Flat Screen WARRANTYOwner’s Manual Wall MountWarranty & Warranty Registration 5-Year Limited WarrantyWARRANTY REGISTRATION M4X14 Component ChecklistDWT1323S M5X141.Disassemble VESA Plate 2a. Mount on Wood Stud Wall2b. Mount on Solid Brick and Concrete Block Anchor Bolt 3. Install the Wall PlateFor clarity, outer cover is not shown 13-09-229-93-32A5-EN.inddD5 Washer M4X14 M5X14 4. Install the VESA PlateTop of display D5 Washer M4X14 M5X14 Screw VESA plate onto the displayMaintenance 6. Adjustment5. Hang the display onto the Wall Plate Wall