Notes:
•If you change network settings, change them on all the network devices before changing them for the access
point.
•If you have already changed the wireless network settings on your access point, then you must change the
settings on all the other network devices before you can see them on the network.
For Windows users
1Click or Start.
2Click All Programs or Programs, and then select the printer program folder from the list.
3Select Printer Home.
4Click the Settings tab.
5Click the Wireless setup utility link.
Note: You may be prompted to connect the printer to the computer again using th e installation cable as part
of the setup process.
6Follow the instructions on the computer screen.
For Macintosh users
1From the Finder desktop, double-click the printer folder.
2Double-click Wireless Setup Assistant.
3Follow the instructions on the computer screen.
Wireless print server not installed
You may see a message during installation indicati ng that the printer does not have a wireless print ser ver installed.
If you are sure the printer is capable of w ireless printing, try the following:
CHECK POWER
Make sure the light is on.
“Communication not available” message displays when printingwirelessly
These are possible solutions. Try one or more of the following:
MAKE SURE YOUR COMPUTER AND PRINTER HAVE VALID IP ADDRESSES FOR THE NETWORK
If you are using a laptop and have power saving settings enabled, you may see the ”Communication not available”
message on your computer screen when you attempt t o print wirelessly. This can occur if the laptop hard drive
has powered down.
If you see this message, wait a few seconds and then try to print again. The laptop and printer require a few seconds
to power up again and reattach to the wireless network.
If you see this message again after you have waited long enough for the printer and the laptop to attach to the
network, there may be a problem with your wireless network.
Troubleshooting
149