3Close the printer.
SELECT YOUR PRINTER FROM THE PRINT DIALOG BEFORE SENDING THE PRINT JOBMAKE SURE THE PRINT JOB IS NOT PAUSEDMAKE SURE YOUR PRINTER IS SET AS THE DEFAULT PRINTER
RECONNECT THE PRINTER POWER SUPPLY
1Turn off the printer, and then unplug the power cord from the wall outlet.
2Gently remove the power supply from the printer, an d then reinsert it.
3Plug the power cord into the wall outlet, and then turn on the printer.
REMOVE AND RECONNECT THE USB CABLE CONNECTED TO YOUR PRINTER
CHECK THE USB CONNECTION
1Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.
2Firmly plug the square end of the USB cable into the back of the printer.
3Firmly plug the rectangular end of the USB cable into the USB port of the computer.

The USB port is marked with a USB symbol.

REMOVE AND REINSTALL THE PRINTER SOFTWARE
Printer is printing blank pages

Blank pages may be caused by improperly installed ink cartridges .

REINSTALL THE INK CARTRIDGES AND DEEP CLEAN AND ALIGN THE PRINTHEAD
1Reinstall the ink cartridges, see “Replacing ink cartridges” on page 13 for more information.

If the cartridges do not seem to fit, make sure the printhead i s properly seated, and then try installing the

cartridges again.

2Load plain paper.
3From the printer control panel, press .
4Press the arrow buttons to scroll to Maintenance, and then press .
Troubleshooting
119