Lexmark 2W2, 2WE, 4443, 90T6005, Pro200 Printing from a Bluetooth-enabled device

11 Press the Color/Black button to set a color or black-and-white print.

When you select color or black-only printing, the light near your choice comes on.

12 Press to print the photos .

Note: For best results, allow the prin ts to dry at least 24 hours before stackin g, displaying, or storing.

If your camera supports Digital Print Order Format (DPOF), then you can specify which photos to print, how many of

each, and the print settings while the memory card is still in the camera. The printer recognizes these settings when

you insert the memory card into the printer or connect the camera to the printer.

Note: If you specify a photo size while the memory card is sti ll in the camera, then make sure that the size of the

paper loaded in the printer is not smaller than th e size you specify in the DPOF selecti on.

1Load photo paper.

2From the printer control panel, press .

3Insert a memory card.

Memory Card Detected appears on the display.

4Press the up or down arrow button to scroll to Print Photos, and then press .

5Press the up or down arrow button to scroll to Print Camera Selections (DPOF), and then press to

print the photos.

Note: This option appears only if a DPOF file is detected in the memory card.

Note: For best results, allow the prin ts to dry at least 24 hours before stackin g, displaying, or storing.

Printing from a Bluetooth-enabled device

•This printer is compliant with Bluetooth Specifica tion 2.0. It supports the following profiles: Object Pu sh Profile

(OPP) and Serial Port Profile (SPP). Check with your Bluetooth-enabled device manufacturers (cellular phone or

PDA) to determine their hardware compatibility and interoperability. It is recommended that you use the latest

firmware on your Bluetooth-enabled device.

•To print Microsoft documents from your Windows Mobile/Pocket PC PDA, a dditional third-party software a nd

drivers are required. For more information about the required software, see the documentation for your PDA.

Note: The printer does not support printing files from your computer using a Bluetooth connection.

You need to set up a connection between a Bluetooth-enabled device an d your printer if you are sending a print job

from the Bluetooth device for the first time. You will need to repeat the setup if:

•You reset the printer to its factory default settings.

•You change the Bluetooth security level or the Bluetooth pass key.

Printing

Lexmark Printing from a Bluetooth-enabled device