Photo menu The following Photo options will not time out after two minutes of inactivity or after you
turn off the printer, but they will return to the factory default settings when a memory
card or flash drive is removed.
Layout
Colorized Effect
Photo Size
Quality

To change the temporary settings into ne w default settings

1From the printer control panel, press .
2Press the up or down arrow button to scroll to Defaults, and then press .
3Press the up or down arrow button to scroll to Set Defaults, and then press .
Use Current appears on the displa y.
4Press again to select Use Current.
5Press until you exit Setup, or press another mode button.

To disable the settings timeout featur e

You can disable the settings timeout feature if you do not want the printer to revert to the default settings after two
minutes of inactivity or after the printer is turned off.
1From the printer control panel, press .
2Press the up or down arrow button to scroll to Device Setup, and then press .
3Press the up or down arrow button to scroll to Clear Settings Timeout, and then press .
4Press the up or down arrow button to scroll to Never, and then press .
5Press until you exit Setup, or press another mode button.
Changing the Power Saver timeout
The Power Saver timeout is the time it takes for the printer to switch to Power Saver mode when the printer is left
idle. The Power Saver feature optimizes energy efficiency by re ducing the printer power consumption (as mu ch as
28 percent on some printer models) compared to the default p rinter settings. To save the most energy, sel ect the
lowest Power Saver timeout.
1From the printer control panel, press .
2Press the up or down arrow button to scroll to Device Setup, and then press .
3Press the up or down arrow button to scroll to Power Saver, and then press .
4Press the up or down arrow button to select a Power Saver timeout, and then press .
5Press until you exit Setup, or press another mode button.
Using the printer control panel buttons and menus
18