Printing photos from a PictBridge-enabled digital camera
PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera
without using a compute r.
1Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the camera.
2Insert the other end of the cable into the PictBridge por t on the front of the printer.
W
F
I
I
PRINTING
Notes:
Make sure that the digital camera is set to the correct USB mode. If the camera USB selection is incorrect,
then the camera is detected as a flash drive, or an error message is displayed on the printer control pan el.
For more information, see the camera documentation.
The printer reads only one memory device at a time.
W
F
I
I
PRINTING
Warning—Potential Dama ge: Do not touch any cables, any networ k adapter,
any connector, the memory device, or the printer in the areas shown while
actively printing, reading, or writing from the memory card. A loss of data can
occur.
3If the PictBridge connection is successful, then the following message appears on the display: Use Camera to
choose and print photos. Pres s OK to select printer default se ttings.
Printing
41