Nortel Networks 42C4911 manual Configure Virtual Interface Routers, Enable Vrrp Hot Standby

Alteon OS Application Guide

2.Configure Virtual Interface Routers.

/cfg/l3/vrrp/on		(Turn on VRRP)
>> Virtual Router Redundancy Protocol# vr 1(Select Virtual Router 1)
>> VRRP Virtual Router 1# ena		(Enable VR 1)
>> VRRP	Virtual Router 1# vrid 1	(Select the Virtual Router ID)
>> VRRP	Virtual Router 1# if 1	(Select interface for VR 1)

>> VRRP Virtual Router 1# addr 174.14.20.100(Define IP address for VR 1) >> VRRP Virtual Router 1# ..

>> Virtual Router Redundancy Protocol# vr 2(Select Virtual Router 2)

>> VRRP Virtual Router 2# ena					(Enable VR 2)
>> VRRP Virtual Router 2# vrid 2					(Select the Virtual Router ID)
>> VRRP	Virtual	Router	2#	if 2	(Select interface for VR 2)
>> VRRP	Virtual	Router	2#	addr 10.1.1.100	(Define IP address for VR 2)

3.Enable VRRP Hot Standby.

/cfg/l3/vrrp/hotstan ena (Enable Hot Standby)

4.Configure VRRP Group parameters. Set the VRRP priority to 101, so that this switch is the Master.

/cfg/l3/vrrp/group
>> VRRP Virtual Router Group# ena			(Enable Virtual Router Group)
>> VRRP Virtual Router Group# vrid 1			(Set Virtual Router ID for Group)
>> VRRP	Virtual	Router Group# if 1	(Set interface for Group)
>> VRRP	Virtual	Router Group# prio 101	(Set VRRP priority to 101)

>> VRRP Virtual Router Group# track/ports ena(Enable tracking on ports)

5.Turn off Spanning Tree Protocol globally. Apply and save changes.

/cfg/l2/stg 1/off	(Turn off Spanning Tree)
>> Spanning Tree Group 1# apply	(Apply changes)
>> Spanning Tree Group 1# save

240 „ Chapter 13: High Availability 42C4911, January 2007