3From the printer control panel, press .
4Press the up or down arrow button to scroll to Pho to Reprint.
5Press the left or right arrow button to select the desired photo size.
6Press .
Note: For best results, allow the prin ts to dry at least 24 hours before stackin g, displaying, or storing.
Copying a two-sided document
1Load paper.
2Load an original document faceu p into the ADF or facedown on the scanner glass.
3From the printer control panel, press .
4Press the up or down arrow button to scroll to 2-Sided Copies.
5Press the left or right arrow button to scroll to 2 to 1 or 2 to 2.
•Select 2 to 1 to mak e single-sided copies of the two-sided docu ment.
•Select 2 to 2 to make two-side d copies (like the orig inal document).
6Press .
7Follow the instructions on the display.
Enlarging or reducing images
1Load paper.
2Load an original document facedow n on the scanner glass.
3From the printer control panel, press .
4Press the up or down arrow button to scroll to Resize.
5Press the left or right arrow button to select the setting that you want.
Notes:
•If you select Custom %, then press , and then press the left or right arrow button to select the desired
custom percent value. Press to save the setting.
•If you select Borderless, then the printer will reduce or enlarge the document or photo as necessary to print
a borderless copy on the paper size that you selected. For best results with this resize setting, use photo
paper and set the paper type to Photo, or let the printer automatically detect the paper type.
6Press .
Note: After the copy job is finished, press to reset the settings to the default. The resize setting also switches to
100% after two minutes of printer inactivity.
Copying
54