Tripp Lite PDU Rackmount Power Strips Features, Specifications, Limited Lifetime Warranty

Models: PDU Rackmount Power Strips

1 8
Download 8 pages 60.46 Kb
Page 2
Image 2
Features

200202028 93-2030 PDU Owner’s Manual.qxd 4/29/02 4:04 PM Page 2

Features

Circuit Breaker(s)

If the current draw of the equipment connected to your power strip exceeds your model’s Maximum Load Rating (see Specifications) for longer than a few seconds, a circuit breaker will trip to prevent any possible damage. When a circuit breaker trips, its plunger will pop up. Remove excess equipment and allow the breaker to cool one minute before depressing its plunger to reset the breaker.

Grounding Lug

Use this screw (located by the power strip’s receptacles) to connect your power strip to ground.

Input Receptacle (IEC Model Only)

The PDU12IEC has no power cord. Instead, it has a IECC20 input receptacle. To connect a PDU12IEC to utility power, use a user-supplied detachable power cord with an IEC plug on one end and a plug appropriate to your local utility outlets on the other.

Specifications

 

PDU1215

PDU1220

PDU2430

Nominal Voltage/Frequency:

120V/50 or 60 Hz

120V/50 or 60 Hz

120V/50 or 60 Hz

Outlet Power Rating (amps):

15 amps

20 amps

15 amps

Maximum Load Rating (amps):

15 amps

20 amps

30 amps

AC Receptacles:

12 x NEMA 5-15R

12 x NEMA 5-15/20R

24 x NEMA 5-15R

AC Line Cord:

15', w/NEMA 5-15P plug

15', w/NEMA 5-20P plug

15', w/NEMA 5-30P plug

Circuit Breaker(s) (Resettable):

15 amps

20 amps

2 x 15 amps

Dimensions (HxWxD, inches):

1¾ × 17¼ × 37/8

1¾ × 17¼ × 37/8

1¾ × 17¼ × 37/8

Approvals:

UL, cUL

UL, cUL

UL, cUL

 

PDU12IEC

Nominal Voltage/Frequency:

100V to 240V/50 or 60Hz

Outlet Power Rating (amps):

15 amps for 100V to 120V or

 

10 amps for 208 to 240V

Maximum Load Rating (amps):

16 amps

AC Receptacles:

12 x IEC320-C13

AC Line Cord:

IEC320-C20

Circuit Breaker(s) (Resettable):

2 x 16 amps

Dimensions (HxWxD, inches):

1¾ × 17¼ × 37/8

Approvals:

CE

Limited Lifetime Warranty

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for its lifetime. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole discretion. Service under this Warranty can only be obtained by your delivering or shipping the product (with all shipping or delivery charges prepaid) to: Tripp Lite, 1111 W. 35th Street, Chicago, IL 60609. Seller will pay return shipping charges. Call Tripp Lite at (773) 869-1234 before sending any equipment back for repair.

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTEND PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which vary from jurisdiction to jurisdiction).

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific application.

Policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice.

2

Page 2
Image 2
Tripp Lite PDU Rackmount Power Strips Features, Specifications, Limited Lifetime Warranty, Circuit Breakers, Grounding Lug