Features continued

Circuit Breakers (Select Models): If the connected equipment load on a load bank exceeds the Maximum Load Rating of the load bank, the circuit breaker will trip. Disconnect excess equipment and switch breaker to the on position to reset the breaker. Models with multiple outlet banks have a circuit breaker for each bank. Circuit breakers are only used to protect output load banks.

Cord Retention Bracket: Provides secure attachment points for connected equipment cords.

Mounting Brackets: Use these brackets to mount the PDU.

A

LINK

 

 

 

STATUS

 

 

 

 

 

 

RESET

CONFIG

OSENSE

ACCY

VIR

 

EN

 

PDUMVROTATEBRKT Mounting Accessory: Use these V-shaped brackets to mount the PDU with its outlets facing the rear of the rack.

SNMP Reset Button: Press the reset button A for 3 seconds to reboot the PDU's network card. Rebooting the network card will not erase network settings or interrupt AC power. The reset button is recessed; use a suitable tool to press it.

ACCY Port: The port is reserved for future expansion.

PS/2 Port: Use this port to connect a Tripp Lite ENVIROSENSE environmental sensor to provide remote temperature/humidity monitoring and a dry contact interface to control and monitor alarm, security and telecom devices. Visit www.tripplite.com for ordering information. Note: Do not connect a keyboard or mouse to this port.

RJ-45 Configuration Port: Use this port to provide a direct terminal connection to a computer with a terminal emulation program. An RJ-45 cable is included with the PDU. If you need a replacement cable, visit www.tripplite.com for ordering information.

9

201112142 933151.indb 9

1/24/2012 2:09:59 PM

Page 9
Image 9
Tripp Lite PDUMNV20 owner manual Accy Port The port is reserved for future expansion