![](/images/new-backgrounds/1190866/1908665x1.webp)
200607096
Quick Installation
1Connect the UPS to
an electrical outlet.
Make sure the outlet does not share a circuit with a heavy electrical load such as an air conditioner or refrigerator.
2Plug a computer, monitor and/or other equipment into
the UPS system.
The UPS is designed to support only computer equipment. Connecting high power draw equipment such as household appliances or laser printers to outlets providing UPS battery backup will overload the UPS. Special outlets (clearly labeled on the rear panel) provide
“UPS/Surge” receptacles are used to provide connected equipment with AC line power during normal operation and battery power during blackouts and brownouts. They also protect equipment against damaging surges and line noise. Connect the computer and monitor to the “UPS/Surge” receptacles.
3Select UPS Operating Mode.
Press the ON/OFF button to toggle the UPS between the ON (“ ” LED lit) and the OFF (“
” LED not lit) modes.
1 |
NORM DELAY
2 |
3
3