Installing Your Analyzer
STEP 5. Verify the Analyzer Operation
To Test the Reflection Mode
1.Connect the equipment as shown and press 
Preset 
.
2.Look at the measurement trace displayed on the analyzer. It should be similar to the trace below.
3.ES models only: To check the reverse reflection mode for channel 1, press
Meas
Refl: REV S22 (B/R) .
The measurement trace should be similar to the trace shown below.
4.If you are ready to start making measurements, continue with Chapter 2 , “Quick Start: Learning How to Make Measurements.”
Chapter 1 |
