Installing Your Analyzer
STEP 4. Configure the Analyzer
To Attach Cabinet Flanges with Front Handles to the Analyzer (Option 1CP)
1. Ensure that the cabinet flange kit with | 2. Remove the side trim strips. |
handles is complete. |
|
•(2) cabinet mount flanges
•(2) front handles
•(6) screws
3. Attach the cabinet mount flanges and the | 4. Remove the feet and the tilt stands before | |
handles to the sides of the front panel, | cabinet mounting the instrument. | |
using three screws per side. (Attach the |
| |
flanges to the outside of the handles.) |
| |
WARNING | If an instrument handle is |
|
| damaged, you should |
|
| replace it immediately. |
|
| Damaged handles can break |
|
| while you are moving or |
|
| lifting the instrument and |
|
| cause personal injury or |
|
| damage to the instrument. |
|
Chapter 1 |
