Tripp Lite SU10KRT3UHV Leds Alarms & Switches, Surge / Noise Suppression, Physical, Environmental

Brownout correction

Maintains continuous operation without using battery power during brownout / undervoltage conditions to 156V AC, increasing output within 2% of selected nominal

LEDS ALARMS & SWITCHES

Front panel LEDs

6 LED DISPLAY: line power, bypass, inverter, charger, output AC and battery operation.

SELECTABLE LCD DISPLAY: input/output voltage, Hz, battery voltage and charge level and detailed warnings regarding all major UPS functions.

Alarms

Switches

Multi-function audible alarm offers notification of UPS start, backup operation, low battery, overload, UPS fault, inverter fault, DC bus fault, overtemperature, remote shutdown, shutdown imminent and shutdown complete

Includes main power off/on switch, plus 2 switches to set and execute scrollable LCD functions

SURGE / NOISE SUPPRESSION

AC surge	1320 joules
suppression
AC suppression	Instantaneous
response time
EMI / RFI AC noise	Yes
suppression
PHYSICAL
Shipping weight (lbs)	327.56
Shipping weight (kg)	147.4
Unit weight (lbs)	Power Module 54.8 lbs. (59.8 lbs w/SUPDMB710HW); Battery Pack: 158.73 lbs.
Unit weight (kg)	Power Module: 24.66kg (26.91kg w/SUPDMB710HW), Battery Pack: 71.43kg
Unit Dimensions	Power Module 5.14 x 17.5 x 25 (30.25 in. depth w/SUPDMB710HW), Battery Pack 5.16 x 17.5 x 2
(HWD/in)
Unit Dimensions	Power Module 13.1 x 44.5 x 63.5 (76.8 cm depth w/SUPDMB710HW); Battery Pack 13.1 x 44.5 x 63.5
(HWD/cm)
Material of	Steel
construction
Form factors	Rack (6U)
supported
Cooling method	Built-in cooling fan
Battery Access	User replaceable, hot swappable external battery pack
ENVIRONMENTAL
Relative Humidity	0 to 95%, non-condensing
Storage Temperature	+5 to +122 degrees Fahrenheit
Operating	+32 to +104 degrees Fahrenheit
Temperature
COMMUNICATIONS
Network monitoring	Includes 2 built-in DB9 monitoring ports (1-RS232 / 1-contact closure)
port
Software and cabling	Includes PowerAlert UPS monitoring software for all common network and standalone operating systems. Cabling
included	included.
SNMP compatibility	Built-in accessory slot accommodates internal SNMP / Web card and other network accessories
WatchDog	Yes, compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot
compatibility	of application / OS or hard power off/on reboot of connected equipmentideal for unattended kiosk applications

LINE / BATTERY TRANSFER

Transfer time from line power to battery mode

Low voltage transfer to battery power

Zero transfer time: on-line UPS continuously converts incoming AC to DC, then back to AC. When line power is interrupted, UPS maintains continuous output from battery reserves with absolutely no disruption in output AC power.

Maintains continuous operation during undervoltages as low as 156V AC. Below this point, output is maintained utilizing battery reserves.