Tripp Lite SU20K3/3XR5 warranty Features, Specifications, System Overview, Output, Input

Package Includes

SU20K3/3XR5 UPS System (power and battery components in one module)

PowerAlert Software and cabling

Warranty information

Instruction manual

Features

Large internal battery compartment contains more internal batteries than the equivalent standard-run model (SU20K3/3) and more space to add additional optional internal battery packs to extend runtime.

Saves valuable space: power and battery components combined into a single small-footprint module

Simplifies runtime scalability: convenient front-panel battery access for expandable runtime with additional internal battery packs

True on-line, double conversion UPS with IGBT technology provides pure, sine wave AC output at all times

Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time

Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems

20,000VA/16,000 watt power capacity with 3-phase, hardwire 120/208V AC input/output connections

Features a wide input voltage correction range: 88 - 144/166 - 250V AC

Included internal batteries provide 42 minutes runtime at half load (8,000 watts) and 17 minutes runtime at full load (16,000 watts)

3:1 crest factor safely supports a variety of equipment, even those with wildly-fluctuating power demands

Extend runtime by installing optional internal battery packs (model # SURBC2030) through the front panel access door. SU20K3/3XR5 includes 5 internal battery packs and accepts 3 additional internal battery packs. A standalone battery module compartment with a 4 battery pack capacity and daisy-chain capability (model # SUBF2030) is available to further extend runtime.

3 communication ports (RS-232, contact closure and AS-400)

Slot for optional SNMP card (model # SNMPWEBCARD)

Manual bypass switch as well as an automatic bypass function ensures 100% availability of connected equipment by safely passing through AC power when the UPS system requires maintenance

Battery Start Switch allows cold restart of UPS during a prolonged blackout to utilize its batteries for periodic system access or data retrieval

Emergency Power Off button turns UPS output OFF and disables Bypass output

PowerAlert Universal UPS Power Management Software and 6 ft. communication cable included

1-year limited repair warranty

Start-up service program is recommended to enhance the reliability of the installation

Built-in Emergency Power Off (EPO) interface supports remote emergency shutdown in large facilities Combination LED/LCD display

Specifications

SYSTEM OVERVIEW

Voltage	120/208V AC, 3-phase, 4-wire (plus ground), wye
compatibility
Frequency	50/60 Hz (auto-selectable)
compatibility
OUTPUT
Output VA	20,000 (20kVA)
Output watts	16,000
Output nominal	120/208V AC, 3-phase, 4-wire (plus ground), wye
voltage
Output voltage	Maintains pure sine wave output at all times, regulated within 2% of nominal output voltage, less than 3% total harmonic
regulation	distortion (using IGBT Inverter)
Output frequency	Regulates line frequency at 50 or 60 Hz, +/- 3 Hz
regulation
Outlet quantity /	Hardwire
type
INPUT
Maximum input	60A (per phase, online)
amps
Input connection	Hardwire
type