Tripp Lite SU8000RT3UHW warranty Features, Specifications, System Overview, Output, Input, Battery

One set of tower stands for upright tower configuration

PowerAlert software, complete data cabling, user manual with warranty information

Features

8,000 VA (8kVA) on-line, double-conversion UPS system (High voltage input/High voltage output)

Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without powering off connected equipment

Installs in only 6 rack spaces (3U power module/3U battery pack) with a maximum installed depth of 32.5 inches

Offers 6 min. runtime at full load (8000VA/6400W) and 15 min. at half load (4000VA/3200W). Runtime is expandable with any number of optional external battery packs

Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output (user selectable)

Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output

Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V

Standard 3-wire 208V hardwire input and output connections

Detailed LCD panel with scroll buttons offers detailed diagnostic test information on startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage, battery charge level and more

Network-grade AC surge and noise suppression

Zero transfer time between AC and battery operation

Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling

Emergency Power Off (EPO) interface

Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC & DC-to-AC conversion, bypass mode and output power status

Fault-tolerant auto-bypass mode prevents loss of output during UPS fault conditions or excessive UPS loading

4-post rackmount and upright tower installation accessories included. 2POSTRMKITWM two post rackmount hardware accessories available

Field replaceable, hot swappable power module and external battery packs

Attractive all-black color scheme

2-year warranty; $250,000 connected equipment insurance

Extended warranty and service contracts available

Specifications

SYSTEM OVERVIEW

Voltage compatibility	208V AC (200/208/220/230/240V)
Frequency	50/60 Hz
compatibility
OUTPUT

Output VA

Output watts

Output nominal voltage

Output voltage regulation

Output frequency regulation

Outlet quantity / type

INPUT

8000

6400

208V AC (200/208/220/230/240V)

Maintains pure sine wave output at all times, regulated within 2% of selected nominal output voltage, less than 3% total harmonic distortion when used with computer loads

Regulates line frequency to 50/60Hz +/- 0.05Hz

Hardwire (3-wire)

Maximum input amps

Input connection type

BATTERY

200V - 38A / 208V - 36A / 220V - 34A / 230V - 33A / 240V - 32A

Hardwire

Full load runtime

6 min. (8000VA/6400W)

Half load runtime

15 min. (4000VA/3200W)